The 8K Mirror polishing machine specialize in buffing the surface of the sheet and coil with the water and Al2O3, let the sheet and coil sanding pattern is mirror.

The Surface Gloss is over 690.6 after finished. (Before 525.8)

The surface roughness is below 0.01um. 

The speed of the machine is very slow, in order to keep the sheet and coil under the enough mechanical reaction. 

Whole of the production line, the main production of the 8K is over 1500 Ton/ once month. 

And the production line should cover more than 90*8 square meters.

The kinds of rough group are 180# 240# 400# 600# and so on. 

Because of the craft of the mirror in different line, it can adjust the suitable rough group by their selves, and the rough group is not unchanged.

It is up to customers’ choice and the requirement of the sanding pattern. 

If possible, we also want to receive the sample of the sanding pattern from your side. 

The grinding head change to the new ones, need the sheet to clean the dirty stuff to keep the buffing results.

This is produced in an equivalent manner to a No.7 finish, the final operation being done with extremely fine buffing compounds. The final surface is blemish free with a high degree of image clarity and is the true mirror finish.

Website: www.ouyigang.com

Address: Chengye 6th Road, Gangbei Industrial Zone, Chencun Town, Shunde District, Foshan City, Guangdong Province, China. 

E-Mail: lavendertsui94@gmail.com

Function and the characteristics 1. It applies to grinding the surface of 0.4 mm-3.0 mm 2B. BA stainless steel sheet, making the sheet have 8K mirror effect.

2. Delivery with rolling wheel, motor variable frequency adjusting the speed, roll synchronize Via the worm reduction box, deliver smoothly, preventing the sheet slip during the processing.

3. The floor of the platform is made up of organic toughened glass, increasing its working life.

4. Reasonable design to the point control part, it is more reliable and safer.

5. The material for swing parts is specially treated, having excellent wear-resistant

6. Refining grinder is made of A-alloy, so as to achieve the effect of corrosion-resistant, acid-resistant, wear-resistant.

7. The surface glossy over 690.6, the thickness of the surface below 0.01 um.

8. Some of the machine with the fully automatic function, or semi automatic function.

9. And we process the plate normal size is 0.3-4.0 mm in thickness, the length of sheet is 2.44-6.0 m, the coil more 5-10 tons.

10. We could manufacture the customize machine for the special plate in sheet and coil.