Broaching Machine

Notch Broaching machine suitable for ferrous & non-ferrous material for sample
preparation of ‘ V ’ & ‘ U’ notches for Impact Testing Machine.
Notch Broaching Machine can cut correct ‘ U ‘ & ‘ V ‘ notches in Charpy or Izod
specimen by means of a multi-toothed broach.

Manual Notch Cutting Machine:
¬ Robustly constructed machine cuts the notches by means of a specially designed
multi-toothed broach, which is drawn across the specimen by self -push of
rotating hand wheel.
¬ A simple hand-vice for holding the specimen is built on to the machine. The
tooling includes the adjustors & end stops necessary to ensure notch-depth &
position are correctly set.
¬ The approx.weight is around 35 kg.
¬ The machine dimension (approx.) 210mm X 210mm X 1050mm.

Motorised Notch Cutting Machine:
¬ The machine is a free standing unit built sturdily.
¬ The broach is mounted in a carrier, which is drawn by a twin lead screw
mechanism through the full stroke with the help of 0.5 HP motor.
¬ V / U notch Broaching Machine fixture to clamp the specimen. The tooling
includes the vice for holding the 10mm X 10mm specimen. The tooling/ fixtures
include the adjustors & the end stop necessary to ensure the notch depth &
position accurately as per the Standards.
¬ The approx. weight is around 100 kg.
¬ The machine dimension (approx.) 385mm X 385mm X 1050mm.